Model No. CC48
Finish Simpson Strong-Tie gray paint
Beam Width (in.) 3 1/2
Post Size 4×8
Dimensions (in.) W1 3 5/8
Dimensions (in.) W2 7 1/2
Dimensions (in.) L 11
Dimensions (in.) H1 6 1/2
Bolts Size 5/8
The CC is designed to provide strong column-beam connections in wood construction. The seat of the column cap provides an additional surface area of bearing that extends beyond each side of the column. The CC helps to distribute the load from the beam and provide support for the connection.
Ordering Information
- This is a Special order product
Key Features
- Certified welds for confidence in strength and loading
- Uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements to ensure optimal performance
- Diamond holes to provide temporary fastening
Material
- CC3 1/4, CC44, CC46, CC48, CC4.62, CC64, CC66, CC68, CC6-7 1/8 — 7 gauge; all others — 3 gauge
Finish
- Simpson Strong-Tie gray paint. Some products available in HDG, stainless steel or black powder coat
Installation
- Use all specified fasteners; see General Notes
- Bolt holes shall be a minimum of 1/32″ to a maximum of 1/16″ larger than the bolt diameter (per 2015 NDS, section 12.1.3.2); bolt holes should be drilled from one side all the way through the beam to maintain hole tolerances
- Contact engineered wood manufacturers for connections that are not through the wide face
Options
- Straps may be rotated 90° where W1 ? W2 (Custom order)
- For special, custom, or rough-cut lumber sizes, provide dimensions. An optional W2 dimension may be specified. (The W2 dimension on straps rotated 90° is limited by the W1 dimension.)
Note: The image displayed is a generic representation of the type of product. Product dimensions and/or Screw or Bolt holes may differ from picture. Please see item description for specifications.
Be the first to review “Simpson Strong-Tie CC48 4x Beam 8x Post Column Cap – Gray Paint”
Related products
Reviews
There are no reviews yet.